Driftmaster Rod Holders

<Back to Products

Driftmaster Rod Holders Bases are not included with rod holders


	Driftmaster PRO 200-H - Holds rod tip in horizontal position for straight down fishing. Driftmaster Li'l Pro 210-H - 5 angle keeps long pole tips from dipping into the water. The Li'l Pro is a favorite in crappie tournaments for trolling jigs.

		PRO 200-H Price: $17.50	Li'l Pro 210-H Price: $12.75
		quantity	quantity

Bases are not included with rod holders


	Driftmaster Flatliner & Driftmaster Li'l Flatliner - Holds rod tip at 25 . Popular on bass or Jon boats with low sides. Keeps rod tip out of water under rough conditions. Used for straight down fishing or where bait is cast away from boat.

			Flatliner 250-H Price: $17.50 quantity				Li'l Flatliner 260-H Price: $12.75 quantity
Bases are not included with rod holders

					Driftmaster Duo - Li'l Duo - A two-position rod holder for drift fishing or trolling. Holds rod at 0 or 30 angle. Stainless steel stem.

						Duo 255-H Price: $19.95 quantity			Li'l Duo 265-H Price: $16.95 quantity
Bases are not included with rod holders

		Driftmaster Lean Green - A functional, "no frills" design, but nothing was spared in quality, durability or performance. Not available in Pro Series. Bases not included.

						Price: $9.95 quantity

Bases are not included with rod holders

		Troller - A two-position rod holder for trolling. Holds rod at 20 or 50 degree angle. Stainless steel stem.

				Troller 400-H Price: $22.95 quantity				Li'l Troller 410-H Price: $18.95 quantity

Bases are not included with rod holders

Guide - Li'l Guide - Holds pistol grip, straight handle, spinning ... even cane poles! Cradles the sideplates of casting reels. Holds rod at 0 degrees when handle is inserted. Holds casting reels at 10 degree angle when sideplates are placed in cradle.

Guide 500-H Price: $17.50

Li'l Guide 510-H Price: $12.75

Bases are not included with rod holders

The Trophy rod holder is no longer available.

2100-HC GUN SLINGER
Designed With National Champion Ronnie Capps Especially For Spider Rigging.
- "V" Shaped Front For Hook Sets Right Or Left
- Extended Cradel Contoured To Increase Hand Clearence For Quick Graps
- Use With Driftmaster T-Bars For The Ultimate Spider Rig

2100-HC GUN SLINGER Price: $14.95

Rod Rester 600

Avoid tangled lines and broken tips
Quickly attaches to rodholder stem
Secures rod in vertical position while you move to a new spot
Fits Pro or Li'l Pro Series Rod Holder

Base and rod holder not included with the Rod Rester 600.

Rod Rester 600 Price: $10.69

Flush Mount T-Bar #T-150

* Fully adjustable rod angle

* Fits into flush mount rod holders

* Fully adjustable rod angle

* Designed for trolling or bait fishing

* Adjusts to 2 positions: troll to rear or
drift to side of boat

* Requires two 215B Li'l Pro
or 205B Pro bases

* Bases and rod holders sold separately

Flush Mount T-Bar #T-150 Price: $43.75

T-250-H 18" Tall X 24" Wide T-Bar

Includes (4) #210-H Rod Holders
Unique Patent Pending Design Utilizes A Super Strong 1 1/2" Diameter Tube For The Vertical Stem
Unlimited Rod Adjustment
Easy To Turn Out Of The Way Of Trolling Motors Or Walk Ways Then Turn Back And Tighten Securely To Get Back To Fishing.
Can Be Removed And Disassembled For Stroage In About Ten Seconds.
Polished Stainless Base Mounts Flush And Secures With Four Screws For Strength
Polished Stem And T-Bar Means Your System Will Look As Good As It Works.

T-250-H Price: $115.00

T-250-HC 18" Tall X 24" Wide T-Bar

Includes (4) #2100-H Gun Slinger Rod Holders
Unique Patent Pending Design Utilizes A Super Strong 1 1/2" Diameter Tube For The Vertical Stem
Unlimited Rod Adjustment
Easy To Turn Out Of The Way Of Trolling Motors Or Walk Ways Then Turn Back And Tighten Securely To Get Back To Fishing.
Can Be Removed And Disassembled For Stroage In About Ten Seconds.
Polished Stainless Base Mounts Flush And Secures With Four Screws For Strength
Polished Stem And T-Bar Means Your System Will Look As Good As It Works.

T-250-HC Price: $125.00

T-250 18" Tall X 24" Wide T-Bar

Includes a stainless base, screws, and (4) 215-B round rail clamp bases
does not include rod holders

T-250 Price: $67.95

T-250-NB 18" Tall X 24" Wide T-Bar

Same Trolling Bar as the T-250 but WITHOUT THE(4) 215-B round rail clamp bases
does not include rod holders

T-250-NB Price: $40.50

FT-09-H

2 #210-H Rod Holders
1 7" Long / 1 1/2" Wide Flat Bar
1 10" Locking Stem / #200-B Base and Mounting Screws

FT-09-H Price: $41.95

FT-09

1 7" Long / 1 1/2" Wide Flat Bar
1 10" Locking Stem

FT-09-H Price: $19.95

T-5000-8 Troll Pro

1" Diameter X 16 Gauge Stainless Tube
Use 215-B Clamp Bases and any 3/8" Rod Holder Or 205-B Clamp Bases and any
1/2 rod holder.
1/2" mounting stems fit any Pro Series Base or other 1/2 base.
does not include rod holders or bases

T-5000-8 Troll Pro Price: $99.95

Driftmaster Rod Holder 4 rod holder trolling bar

4 Rod Holder Trolling Bar T118-H

Complete with 4 Li'l Pro Rod Holders
Fully adjustable for fishing multiple rods
Full horizontal adjustment

T118-H Price: $89.95

Driftmaster Rod Holder 2 rod holder trolling bar

2 Rod Holder Trolling Bar T009-H

Complete with 2 Li'l Pro Rod Holders
Fully adjustable for fishing multiple rods
Full horizontal adjustment

T009-H Price: $52.50

Star Base Pro 200-B & Li'l Pro 210-B

Fits 2" or wider flat surface. 1/4" dia. mounting holes. Drill 3/16" dia. holes in boat when using screws. Use 1/4" dia. screws.

Pro 200-B Price: $6.40

Li'l Pro 210-B Price: $5.95

Flat Rail Base Pro 201-B & Li'l Pro 211-B

For 1" or wider flat rails (ideal for pontoon boats). Can be used on any flat surface. 3/16" dia. mounting holes. Screws not included with this base.

Pro 201-B Price: $6.40

Li'l Pro 211-B Price: $5.95

Driftmaster Rod Holder base v round base 202

V-Round Base Pro 202-B & Li'l Pro 212-B

Special V-shape on bottom allows base to be mounted on any size round rail or curved surface. 3/16" dia. mounting holes. Screws not included with this base.

Pro 202-B Price: $6.40

Li'l Pro 212-B Price: $5.95

Driftmaster Rod Holder base side mount base

Side Mount Base Pro 203-B & Li'l Pro 213-B

Designed for Jon Boat gunnels where vertical holes can't be drilled. Easily bent in vise to fit difficult mounting locations. 1/4" dia. mounting holes

Pro 203-B Price: $6.40

Li'l Pro 213-B Price: $5.95

Round Rail Clamp Base Pro 204-B, Li'l Pro 214-B, Pro 205-B & Li'l Pro 215-B

Two models available for either 7/8" or 1" round rails. Rod angle can easily be adjusted by loosening one nut and turning base on rail. Hardware included.